Filter
Top Products
Record Your Own Performance
62 DGX-630/YPG-635 Owner’s Manual
3
Recording will start when you play on the keyboard.
You can also start recording by pressing the [START/STOP] button.
The current measure will be shown on the display during recording.
4
Stop recording by pressing the [START/STOP] or [REC]
button.
When recording stops the current measure number will return to 001
and the recorded track numbers in the display will be shown in a box
border.
5
Save the song.
When recording is stopped a message asking if you want to save
the song will appear. Press the [+/YES] button to save the song, or
the [-/NO] button if you don’t want to save the song. If saved, the
song will be stored as a MIDI file in song number 031–035.
If you press the [-/NO] button in response to the confirmation message
the song will not be saved as a MIDI file but will remain in the instru-
ment’s memory until the power is turned off, so you have the option of
converting the song to a MIDI file and saving it later. To do this press
and hold the [REC] button until the save confirmation message appears,
then press the [+/YES] button.
• If the memory becomes full dur-
ing recording a warning mes-
sage will appear and recording
will stop automatically. Use the
song clear or track clear (page
63) function to delete unwanted
data and make more room avail-
able for recording, then do the
recording again.
NOTE
Recording
starts
Current measure
• If you press the [INTRO/END-
ING/rit.] button while recording
a style track, an appropriate
ending pattern will play and then
recording will stop.
NOTE
or
• The recorded Song data will
be lost if you turn the power
to the instrument off without
executing the Save operation.
CAUTION