Filter
Top Products
10
EMX5014C Owner’s Manual
Quick Guide
Mixer Basics
You can use the reverb effect to simulate the sound of a concert hall or jazz club.
1 Turn the PROGRAM dial to select the desired effect type.
To select a reverb effect, turn the dial to any value from 1 to 7.
2 To turn on the effector, set the EFFECT ON
switch to its ON position ( ).
The switch lights up when turned on. As an alternative to the ON
switch, you can use a separately sold FC5 foot switch to toggle the
effector on and off.
3 Set the EFFECT RTN fader to the “0” position.
4 Use the channel EFFECT knobs to adjust the
effect depth for each channel.
5 Use the EFFECT RTN fader to adjust the overall
effect depth.
Note that you can use the PARAMETER knob to adjust the charac-
teristic sound of the selected effect. If you have selected a reverb
effect, the knob adjusts the reverb time.
1
REVERB HALL 1
55
55
REVERB STAGE 1
9
KARAOKE ECHO
CC
CC
FLANGER
2
REVERB HALL 2
66
66
REVERB STAGE 2
0
VOCAL ECHO
DD
DD
PHASER
3
REVERB ROOM 1
77
77
REVERB PLATE
A
CHORUS 1
EE
EE
AUTO WAH
4
REVERB ROOM 2
88
88
DRUM AMBIENCE
B
CHORUS 2
FF
FF
DISTORTION
Adding Some Reverb
3,5
1
4
2