Filter
Top Products
Input specifications 31
EMX5000-20/EMX5000-12—Owner’s Manual
■ Input specifications
■ Output specifications
For European Model
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 70A
Conformed Environment: E1, E2, E3 and E4
Dimensions (WxHxD)
682 × 158 × 538 mm (EMX5000-20) / 478 × 158 × 538 mm (EMX5000-12)
Weight
19 kg (EMX5000-20) / 15 kg (EMX5000-12)
Accessories
Power cord, Owner’s Manual
Input terminals
Gain
control
Actual load
impedance
For use with
nominal
Input level
Connectors on
mixer
Sensitivity
1
1. Sensitivity is the lowest level that can produce an output of +4 dB (1.23 V) or the nominal output level when the unit is set at maximum gain.
(All fader and level controls are at maximum position.)
Nominal Max. before clip
CH INPUT A
(CH1–8/1–16)
–60
5 kΩ 50–600Ω Mics
–80 dB (0.078 mV) –60 dB (0.775 mV) –40 dB (7.75 mV)
XLR-3-31 type
2
2. Balanced. (T=HOT, R=COLD, S=GND)
–16 –36 dB (12.3 mV) –16 dB (123 mV) +4 dB (1.23 V)
CH INPUT B
(CH1–8/1–16)
–60
50 kΩ
600Ω Lines
–80 dB (0.078 mV) –60 dB (0.775 mV) –40 dB (7.75 mV)
PHONE JACK
(TRS)
2
–16 –36 dB (12.3 mV) –16 dB (123 mV) +4 dB (1.23 V)
ST INPUT
(CH9–12/17–20)
–34
10 kΩ
–54 dB (1.55 mV) –34 dB (15.5 mV) –14 dB (155 mV)
PHONE JACK
3
3. Unbalanced.
In these specifications when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms, 0 dBV is referenced to 1 Vrms.
+10 –10 dB (245 mV) +10 dB (2.45 V) +30 dB (24.5 V)
ST SUB IN (1, 2) –12 dB (195 mV) +4 dB (1.23 V) +20 dB (7.75 V)
2TR IN (L, R) –26 dBV (50.1 mV) –10 dBV (316 mV) +10 dBV (3.16 V)
PHONO JACK
3
INSERT IN (CH1–8/1–16) –20 dB (77.5 mV) 0 dB (0.775 V) +20 dB (7.75 V)
PHONE JACK
3
POWER AMP IN (A, B) –12 dB (195 mV) +4 dBV (1.23 V) +18 dB (6.16 V)
PHONE JACK
3
Output terminals
Actual source
impedance
For use with
nominal
Output level
Connectors on mixer
Nominal Max. before cliping
ST OUT (L/R)
150Ω 600Ω Lines +4 dB (1.23 V) +20 dB (7.75 V)
PHONE JACK
1
1. Unbalanced.
ST SUB OUT (L/R)
MONO OUT
AUX SEND 1, 2
EFFECT SEND 1, 2
REC OUT (L/R)
600Ω 10 kΩ Lines
–10 dBV (316 mV) +10 dBV (3.16 V)
PHONO JACK
1
INSERT OUT (CH1–8/1–16) 0 dB (775 mV) +20 dB (7.75 V)
PHONE JACK
1
PHONES (L/R) 100Ω 40Ω Lines 3 mW 75 mW
PHONE JACK (TRS)
2
2. Impedance balaned. (T=HOT, R=COLD, S=GND)
• In these specifications when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms, 0 dBV is referenced 1 Vrms.
SPEAKERS 1 (A, B)
0.1Ω 4/8Ω Speakers 100 W/4Ω 500 W/4Ω
SPEAKON
SPEAKERS 2 (A, B)
PHONE JACK
1