Filter
Top Products
Using Graphic EQ
MGP32X/MGP24X Owner’s Manual
30
Calling up/saving the GEQ program
Eight user programs are available that you can freely edit and
save on the MGP32X/MGP24X.
Calling up the program
1.
Press the GEQ button below the display
repeatedly if necessary until the PROGRAM
page appears.
2. Rotate or press Knob 1 to call up the program
list.
3. Rotate Knob 1 to select the desired program
and press Knob 1 to actually call it up.
Saving the program
Overwriting the selected user program
1. Press and hold Knob 2 for at least two sec-
onds while the user program is selected.
The screen prompts you to save the program.
2. Press Knob 2 to select “OK,” or Knob 1 to can-
cel.
The program will be overwritten.
NOTE
You can also cancel the operation by pressing the GEQ button.
Overwriting another user program
1. Rotate or press Knob 1 to call up the program
list.
2. Rotate Knob 1 to select the user program of
the destination for saving, then press and hold
Knob 2 for at least two seconds.
The screen prompts you to save the program.
3. Press Knob 2 to select “OK,” or Knob 1 to can-
cel.
The program will be overwritten.
NOTE
You can also cancel the operation by pressing the GEQ button.