Filter
Top Products
18
Macintosh
Follow these instructions if you have an Apple Macintosh that is
not equipped with an external MIDI interface. Connect the TO
HOST terminal on the MU5 to the Modem or Printer port on the
Macintosh.
Operation
1
Set the HOST SELECT switch to MAC.
2
Connect the MU5 to the host computer, as shown in the
illustration above. Use a standard Macintosh cable (8-pin
Mini DIN on both ends; see page 22).
3
Turn on the host computer, then the MU5.
4
Start up your music software, and set up the appropriate
options on the software for operation with the MU5.
●
The options you may have to set include:
• MIDI Interface Type ➝ Standard MIDI Interface
• MIDI Time Piece ➝ Off
• Clock ➝ 1 MHz
Other options and settings may have to be made as well. Refer to
the owner’s manual of your particular music software for more
information.
HOST SELECT
MIDI PC-2 PC-1 Mac
TO HOST
DC IN
POWER
ON OFF