Filter
Top Products
02R96 1716 02R96
SPECIFICATIONS
SPECIFICATIONS
DIGITAL INPUT CHARACTERISTICS
*1. XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
1
2
3
Terminal
2TR IN
DIGITAL
CASCADE IN
Format
AES/EBU
IEC-60958
IEC-60958
-
Data Length
24 bit
24 bit
24 bit
-
Level
RS422
0.5Vpp/75
Ω
0.5Vpp/75
Ω
RS422
Connector in Console
XLR-3-31 type (Balanced)
*1
RCA Pin Jack
RCA Pin Jack
D-SUB Half Pitch Connector 68P (Female)
DIGITAL OUTPUT CHARACTERISTICS
1
3
Terminal
2TR OUT
DIGITAL
CASCADE OUT
Format
-
Data Length
-
Level
RS422
0.5Vpp/75
Ω
RS422
Connector in Console
XLR-3-32 type (Balanced)
*4
RCA Pin Jack
RCA Pin Jack
D-SUB Half Pitch Connector 68P (Female)
AES/EBU
*1
Professional
use
2
IEC-60958
*2
Consumer
use
24 bit
*3
24 bit
*3
24 bit
*3
IEC-60958
*2
Consumer
use
0.5Vpp/75
Ω
*1. channel status of 2TR OUT DIGITAL 1
type : 2 audio channels
emphasis : NO
sampling rate : depends on the internal configuration
*2. channel status of DIGITAL OUT 2,3
type : 2 audio channels
category code : 2 channel PCM encoder/decoder
copy prohibit : NO
emphasis : NO
clock accuracy : Level II (1000 ppm)
sampling rate : depends on the internal configuration
*3. dither : word length 16 - 24 bit
*4. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
Can handle 24 bit/96 kHz by double channel mode
Third Party
Waves
Y96K Effect & I/O 8 8 ADAT 24 bit 44.1/48 kHz Toslink x 2
• Specifications and appearance subject to change without notice.
• All trademarks and registered trademarks are property of their respective owners.
Pro Tools
®
and Digidesign
®
are trademarks of Avid Technology Inc.
Nuendo
®
is a trademark of Steinberg Media Technologies AG.
Adat and HD24 are trademarks of Alesis Corporation.
Tascam, TDIF, MX2424 are trademarks of Teac Corporation.
Cobranet and PeakAudio are trademarks of Cirrus Audio, Inc.
Macintosh
®
is a trademark of Apple Computer, Inc.
Windows
®
is a trademark of Microsoft Coporation.
Logic Audio
®
is a trademark of Emagic Soft-und Hardware GmbH.
Available Mini-YGDAI card specifications
Maker Model Function IN OUT Format Res / Freq Connector Note
Maker Model Function IN OUT Format Res / Freq Connector Note
Yamaha
MY8-AT Digital I /O 88ADAT 24 bit 44.1/48 kHz
Toslink x 2 Can handle 96 kHz by double channel mode
MY8-AE Digital I /O 88AES/EBU 24 bit 44.1/48 kHz
D-sub 25pin Can handle 96 kHz by double channel mode
MY8-TD Digital I /O 88TDIF 24 bit 44.1/48 kHz
D-sub 25pin Can handle 96 kHz by double channel mode
MY8-AD24 A to D In 8- - 24 bit 44.1/48 kHz
TRS x 8 Replacing MY8-AD (20 bit 44.1/48 kHz)
MY4-AD A to D In 4- - 24 bit 44.1/48 kHz
XLR x 4
MY4-DA D to A Out -4 - 20 bit 44.1/48 kHz
XLR x 4
MY8-AD96 A to D In 8- - 24 bit 44.1/48/88.2/96 kHz
D-sub 25pin
MY8-DA96 D to A Out -8 - 24 bit 44.1/48/88.2/96 kHz
D-sub 25pin
MY8-AE96S Digital I /O 88AES/EBU 24 bit 44.1/48/88.2/96 kHz
D-sub 25pin
Sampling Rate Converter for Input, 2 cards max. with 02R96
MY8-AE96 Digital I /O 88AES/EBU 24 bit 44.1/48/88.2/96 kHz D-sub 25pin
MY16-AT Digital I /O 16 16 ADAT 24 bit 44.1/48/88.2/96 kHz
Toslink x 2
MY16-AE Digital I /O 16 16 AES/EBU 24 bit 44.1/48/88.2/96 kHz
D-sub 25pin
MY16-TD Digital I /O 16 16 TDIF 24 bit 44.1/48/88.2/96 kHz
D-sub 25pin
MY16-mLAN
mLAN Interface
16 16 IEEE 1394 24bit, 44.1/48kHz 1394 6pin
GENERAL SPECIFICATIONS
Number of scene memories 99
Sampling Frequency Internal 44.1kHz, 48kHz, 88.2kHz, 96kHz
External Normal rate 44.1kHz-10% - 48kHz+6%
Double rate 88.2kHz-10% - 96kHz+6%
Signal Delay Less than 2.0 ms CH INPUT to STEREO OUT (fs=48 kHz)
(CH INPUT to STEREO OUT) Less than 1.1 ms CH INPUT to STEREO OUT (fs=96 kHz)
Fader 100mm motorized with touch sense x 25
Total Harmonic Distortion *
1
fs=48 kHz
Less than 0.05% 20 Hz ~ 20 kHz @ +14 dB into 600Ω
(CH INPUT to STEREO OUT) Less than 0.01% 1 kHz @ +18 dB into 600Ω (fs=48 kHz)
(Input Gain=Min.)
fs=96 kHz
Less than 0.05% 20 Hz ~ 40 kHz @ +14 dB into 600Ω
Less than 0.01% 1 kHz @ +18 dB into 600Ω
Frequency Response Fs=48kHz 0.5,-1.5dB 20Hz - 20kHz @+4dB into 600
Ω
(CH INPUT to STEREO OUT) Fs=96kHz 0.5,-1.5dB 20Hz - 40kHz @+4dB into 600
Ω
Dynamic Range 110 dB typ. DA Converter (STEREO OUT)
(maximum level to noise level)
105 dB typ. AD+DA (to STEREO OUT) @ fs=48 kHz
105 dB typ. AD+DA (to STEREO OUT) @ fs=96 kHz
Hum & Noise
*2
-128dB (EIN : Equivalent Input Noise)
(20Hz-20kHz) -92dB (Residual Output Noise) @STEREO OUT
Rs=150
Ω
STEREO OUT off
Input Gain=max. -92dB (96dB S/N) @STEREO OUT
Input Pad=0dB
STEREO fader at nominal level and all CH INPUT faders at minimum level.
-64dB (68dB S/N) @STEREO OUT
Input Sensitivity=-60dB
STEREO fader at nominal level and one CH INPUT fader at nominal level
Maximum Voltage Gain 74 dB CH INPUT (CH1 ~ 24) to STEREO OUT/OMNI (BUS) OUT
74 dB CH INPUT (CH1 ~ 24) to OMNI (AUX) OUT (via pre input fader)
74 dB CH INPUT (CH1 ~ 24) to CONTROL ROOM MONITOR OUT
(via STEREO bus)
Crosstalk (@ 1kHz) -80 dB adjacent input channels (CH1-24)
Input Gain=Min. -80 dB input to output
Power Requirements U.S./Canada 120 V 200W 60Hz
H 230 V 200W 50Hz
B 230 V 200W 50Hz
Dimensions Height 239(352) mm (including the MB02R96)
Depth 685(697) mm (including the MB02R96)
Width 667(700) mm (including the SP02R96)
Weight 34 kg
Operating free-air 10-35°C
temperature range
Storage temperature range -20-60°C
Accessories AC Cable
CD-ROM (Studio manager)
Options Digital audio interface card (MY16, MY8, MY4 series)
PEAK METER BRIDGE: MB02R96
SIDE PANEL: SP02R96
LIBRARIES
Effect libraries
(EFFECT 1-4) Number of factory presets 61 (EFFECT 2 ~ 4: 53) *
1
Number of user libraries 67
Compressor libraries Number of factory presets 36
Number of user libraries 92
Gate libraries Number of factory presets 4
Number of user libraries 124
EQ libraries Number of factory presets 40
Number of user libraries 160
Channel libraries Number of factory presets 2
Number of user libraries 127
Surround Monitor libraries Number of factory presets 1
Number of user libraries 32
Input patch libraries Number of factory presets 1
Number of user libraries 32
Output patch libraries Number of factory presets 1
Number of user libraries 32
Bus to stereo libraries Number of factory presets 1
Number of user libraries 32
*1 Total Harmonic Distortion is measured with a 6dB/octave filter @80kHz.
*2 Hum & Noise are measured with a 6dB/ octave filter @12.7kHz
equivalent to a 20kHz filter with infinite dB/octave attenuation.
A: XLR-3-31 type (Balanced)
*2
B: Phone Jack (TRS) (Balanced)
*3
Phone Jack (TRS)
*4
Phone Jack (TRS) (Balanced)
*3
RCA pin jack (Unbalanced)
*1. Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V) or the nominal output level when the unit is set to maximum gain. (All faders and level controls are maximum position.)
*2. XLR-3-31 type connectors are balanced (1=GND, 2=HOT, 3=COLD).
*3. Phone jacks are balanced (Tip=HOT, Ring=COLD, Sleeve=GND).
*4. Phone jacks are wired: Tip=OUT, Ring=IN, Sleeve=GND
• In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms.
• For 2TR IN ANALOG 2 levels, 0 dBV is referenced to 1.00 Vrms.
• All input AD converters (except INSERT I/O 1-16) are 24-bit linear, 128-times oversampling.
• +48 V DC (phantom power) is supplied to CH INPUT (1-16) XLR type connectors via individual switches.
Phone Jack (TRS) (Balanced)
*3
ANALOG INPUT SPEC
10k Ω
10k Ω
10k Ω
4k Ω
3k Ω
600 Ω Lines
600 Ω Lines
600 Ω Lines
50-600 Ω
Mics &
600 Ω Lines
600 Ω Lines
Connector
Sensitivity
*1
Input level
Nominal Max. before clip
Actual Load
Impedance
For Use With
Nominal
PAD GAIN
INPUT A/B 1-16 -60 dB
-70 dB (0.245 mV) -60dB (0.775mV) -46dB (3.88mV)
-26dB (38.8mV) -16dB (0.123V) -2dB (616mV)
26
0dB (775mV) +10dB (2.45V) +24dB (12.28V)
-34 dB
-44dB (4.89mV) -34dB (15.5mV) -20dB (77.5mV)
+10 dB
0dB (775mV) +10dB (2.45V) +24dB (12.28V)
INSERT IN 1-16 -6dB (388mV) +4dB (1.23 V) +18dB (6.16V)
2TR IN ANALOG 1 [L, R] +4dB (1.23V) +4dB (1.23 V) +18dB (6.16V)
2TR IN ANALOG 2 [L, R] -10dBV (0.316 V) -10dBV (0.316 V) +4dBV (1.58V)
Input
0
-16 dB
INPUT 17-24
*1. The maximum output level of each OMNI OUT can be set internally.
*2. XLR-3-32 type connectors are balanced (1=GND, 2=HOT, 3=COLD).
*3. Phone jacks are balanced (Tip=HOT, Ring=COLD, Sleeve=GND).
*4. Phone jacks are wired: Tip=OUT, Ring=IN, Sleeve=GND
*5. PHONES stereo phone jack is unbalanced (Tip=LEFT, Ring=RIGHT, Sleeve=GND).
• STEREO OUT [L, R], 0 dBV is referenced to 1.00 Vrms.
• In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms.
• All output DA converters (except INSERT OUT 1-16) are 24-bit, 128-times oversampling.
ANALOG OUTPUT SPEC
600 Ω
150 Ω
150 Ω
150 Ω
150 Ω
600 Ω
100 Ω
Actual Source
Impedance
For Use With
Nominal
Nominal Max. before clip
10k Ω Lines
600 Ω Lines
10k Ω Lines
10k Ω Lines
10k Ω Lines
8 Ω Phones
40 Ω Phones
10k Ω Lines
-
-10dBV (0.316V) +4dBV (1.58V)
-
+4dB (1.23 V) +18dB (6.16 V)
STUDIO MONITOR OUT [L, R]
-
+4dB (1.23 V) +18dB (6.16 V)
C-R MONITOR OUT [L, R]
-
+4dB (1.23 V) +18dB (6.16 V)
+18dB (defalt) +4dB (1.23 V) +18dB (6.16 V)
+4dB -10dB (0.245V) +4dB (1.23V)
INSERT OUT 1-16
-
+4dB (1.23 V) +18dB (6.16 V)
-
4mW 25mW
-
12mW 75mW
Output Level
ConnectorGAIN SW
*1
Phone Jack (TRS) (Balanced)
*3
Output
STEREO OUT [L,R]
OMNI OUT 1-8
PHONES
RCA pin jack (Unbalanced)
XLR-3-32 type (Balanced)
*2
Phone Jack (TRS) (Balanced)
*3
Phone Jack (TRS)
*4
Stereo Phone Jack (TRS)
(Unbalanced)
*5
Phone Jack (TRS) (Balanced)
*3
-
-
Go to www.yamahaproaudio.com to check “Guidance on the use of Mini-YGDAI cards”
Specifications
Can handle 24 bit/96 kHz by double channel mode
Can handle 24 bit/96 kHz by double channel mode
Can handle 24 bit/96 kHz by double channel mode
Check instructions for multiple use
*1 Effects 53 ~ 61 are optional Add-On Effects. These effects become fully available after installation and
authorization. Prior to installation effects 53 ~ 61 function in demo mode only.