Yamaha PSR-280 Musical Instrument User Manual


 
Auto Accompaniment
41
Adjusting the Accompaniment Volume
The playback volume of the accompaniment can be adjusted. This volume con-
trol affects only the accompaniment volume. The volume range is 000 - 127.
1 Select the Accompaniment Volume function.
Press the right Overall button, repeatedly if necessary, until “ACMP VOL”
appears in the display.
2 Change the value.
Use the numeric keypad to set the desired Accompaniment Volume value
(000 - 127). You can also use the [+]/[-] buttons to increase or decrease the
value. Holding down either button continuously increases or decreases the
value.
1beat 2 3
1st measure
4 1234123412
2nd measure 3rd measure
33
...a fill-in pattern
plays immediately
until the end of the
measure...
...and the Main A
or B section
begins here.
If you press the
[MAIN/AUTO
FILL] button
before beat 4...
...a fill-in pattern
plays from here...
...and the Main
A or B section
begins here.
If you press the
[MAIN/AUTO FILL]
button here, after
beat 4...
About the Fill-in Patterns
ACMP VOL
100
Indicates Accompaniment
Volume is selected
Current Accompaniment Volume value
• Accompaniment Volume cannot
be changed unless the Style
mode is active.
Restoring the Default Accom-
paniment Volume Value
If you’ve changed the Accompani-
ment Volume setting, you can
instantly restore the default setting
of “100” by pressing both [+]/[-] but
-
tons simultaneously (when Accom-
paniment Volume is selected).