Filter
Top Products
13
■ About the Mute
Since the Silent Bass is designed with a pickup system that picks up string vibration, the
system can sometimes pick up string vibrations that occur between the bridge and tailpiece.
If this is obvious, attach the supplied mute onto the strings as shown in the illustration below.
• The mute will have little effect if it is attached midway between the bridge and the tailpiece.
Please take note.
Mute
Mute
■ Attaching the Optional Accessories
● Knee Support for the Silent Bass (BKS2)
With the optional BKS2 Knee Support, the instrument
can be leaned against the left knee when playing while
sitting on a stool, etc.
As shown in Fig. A, align the end of the metal frame unit
with the matching indentation on the knee support, and
use the three screws to secure the support in place.
● Extension Frame for the Silent Bass (BEF2)
The optional BEF2 Extension Frame widens the frame
unit to provide greater instrument support.
As shown in Fig. B, use the two screws to secure the
support in place.
• Before attaching or removing optional parts, remove the frame unit from the instrument and place the
frame on a stable surface.
•Before playing the instrument, make sure that the optional parts are not loosely attached.
[Fig. A]
[Fig. B]
BKS2
BEF2
08.7.15, 3:26 PMPage 13