Filter
Top Products
9
• The strings are tuned to the following pitches. The 1st
string is tuned to A, the 2nd string to D, the 3rd string to
G, and the 4th string to C.
Use a piano, tuning fork, tuner, etc., and adjust the pitch
of each string using the tuning pegs.
A
B
1st string (A)
4th string (C)
2nd string (D)
3rd string (G)
Lower
pitch
Raise
pitch
• Use the tension adjustment screw on the tuning machines to
adjust the amount of pressure required to turn the tuners.
*If the tuning machine turns with very slight pressure
→ Rotate the adjustment screw to the right (clockwise: A).
*If the tension is tight and the tuning machine is hard to turn
→ Rotate the adjustment screw to the left (counter-clock-
wise: B).
• Finally, use the adjuster to fine tune the strings.
If the adjuster is too loose,
it could produce noise
while playing.
Caution
Don’t loosen
too much.
Make sure that the Tail
Nylon is correctly po-
sitioned on top of the
Saddle.
Caution
• When the instrument is not being used, loosen the strings until the pitch drops a whole tone.
• If the instrument is not going to be used for an extended period of time, loosen the strings even more.
• Before using the instrument, make sure that the bridge is positioned vertically. Damage to the bridge
and poor sound quality may result if the bridge is not properly positioned.
Tall nylon
Saddle
06.10.4, 1:59 PMPage 9