3-10 CHAPTER 3: SETTING UP FOR MANAGEMENT
Setting Up the VT100 Console
This section provides instructions for setting up the
VT100 console for local or remote management.
1 Connect a VT100-compatible terminal to the serial
port of the Switch 2000 TR. Configure the terminal to
the following settings:
■ 9600 baud
■ 8 data bits
■ 1 stop bit
■ No parity
2 Press [Return] one or more times until the Switch
2000 Main Banner appears. See Figure 3-5.
Figure 3-5 Main Banner
NOTE: You cannot modify these settings. If your ter-
minal is already set up with these values, the Main
Banner appears as soon as power-up completes.
3 Press [Return] at the Main Banner.
4 Log on using the default name security and pass-
word security. See Figure 3-6.
Figure 3-6 Logon Screen
5 Select OK. The Main Menu appears. See Figure 3-7.
Figure 3-7 Main Menu
6 Select the Management Setup option.
The 3Com Switch 2000 TR Management Setup screen
appears. See “Switch 2000 TR Management Setup Fields”.
