75
If you encounter problems with the NJ205 IntelliJack:
■ Verify the IntelliJack is receiving power by viewing the
Power LED (it should be on). If the Power LED is not on,
make sure that:
■ (If using Power Over Ethernet) the other end of the
network cable is plugged into a switch on the network
that has Power Over Ethernet integrated into it, or one
that feeds into an external midspan power supply that
supports Power Over Ethernet.
■ (If using a local power supply) the power supply is
plugged into the IntelliJack and into a working electrical
outlet.
■ Verify the IntelliJack is connected to the network properly
by viewing the Link LED (it should be on). If the Link LED is
not on, make sure the network cable:
■ Is terminated properly. Refer to the connector
manufacturer’s instructions for terminating the cable. Be
sure to test the connector and verify it is working.
■ Has a valid connection to the network.
■ Adheres to proper length and cabling specifications for
your network.
F
Troubleshooting
