MIM-1AMM/MIM-1ASM/MIM-1ASL 105
Interface Cable The MIM-1G.SHDSL module uses regular telephone cables for connection.
n
Telephone cables have been included in the standard shipment package of
MIM-1G.SHDSL.
Connecting the Interface
Cable
You only need a telephone cable to connect one port on a G.SHDSL module to the
PSTN network.
MIM-1AMM/MIM-1AS
M/MIM-1ASL
Introduction By far, the following ATM modules are available for the routers:
■ 1-port ATM (Asynchronous Transfer Mode) 155 Mbps multimode fiber
interface module (MIM-1AMM)
■ 1-port ATM 155 Mbps single-mode fiber interface module (MIM-1ASM)
■ 1-port ATM 155 Mbps single-mode long-haul fiber interface module
(MIM-1ASL)
These ATM modules function in the system to provide ATM interfaces for routers,
supporting:
■ Two frame formats: SDH STM-1 and SONET OC-3;
■ Scrambling in data transmission;
■ Both line clock (when working as DTE interface), and internal clock (when
working as DCE interface);
■ Local cell loopback, local payload loopback, and remote loopback.
Interface Attributes
Table 64 Description of the LEDs on the MIM-1G.SHDSL panel
LED Description
LINK OFF means no link is present; ON means a
link is present.
ACT OFF means no data is being transmitted or
received; blinking means data is being
received or/and transmitted.
Table 65 Interface attributes of MIM-1AMM/MIM-1ASM/MIM-1ASL
Attribute MIM-1AMM module MIM-1ASM module
MIM-1ASL
module
Optical fiber connector SC
Number of ports 1
Interface standard SONET OC-3/SDH STM-1
Interface rate 155 Mbps
