![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/c/ff/cffbc9c8-d7b0-480f-ac2f-9a7ffc165300/cffbc9c8-d7b0-480f-ac2f-9a7ffc165300-bg21.png)
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7150
14” short depth rack server
33
Universal Serial Bus (USB)
There are two Universal Serial Bus ports
located on the I/O panel and five additional
USB headers located on the serverboard.
The headers labeled USB 2/3 and USB 4/5
can be used to provide front side USB acc
ess (cables not included). USB 6 is an A
type. See the tables on the right for pin
definitions.
Serial Ports
Two serial ports are included on the
serverboard: COM1 is a port located
beside the USB ports and COM2 is
a header located on the corener of the
board near the SIMLC. See the table
on the right for pin definitions.
Wake-On-LAN
The Wake-On-LAN header is des-
ignated JWOL on the serverboard.
See the table on the right for pin
definitons. You must enable the LAN
Wak-Up setting in BIOS to use the
function. (You must also have LAN
card with a Wake-On-LAN connector
and cable to use this feature.)