ACS XFC-S Manual

A SERVICE OF

next previous

28

7.5. Cleaning/Replacing the Filter Cartridge

7.5.1. XFC-A

Use the following procedure to clean or replace the filter cartridge:

1. Open the clamp on the lid of the filter.

2. Remove the filter lid.

3. Remove the filter cartridge.

4. Blow compressed air through the filter cartridge from the inside to the outside of the

filter. Replace the filter cartridge if it shows signs of wear.

5. Wipe down the gasket and lid mating surfaces to ensure a good seal. A good vacuum

seal is important for proper operation. Replace gasket if necessary.

6. Re-install the filter cartridge. Make sure the filter cartridge is properly seated in the

housing.

7. Place the hopper lid on the filter.

8. Close the clamp on the lid of the filter.

Spare Parts

Filter Cartridge: CT86348