A SERVICE OF

logo

Open as PDF
next previous
3
1 x Marble support rails
1 x Inner side rails (left) 1 x Inner side rails (right) 4 x rubbers
1 x Supporting rail (lower) Six M8 x 40 socket screws
Figure 2: Figure 3:
Inner frame assembly Assembled inner frame
Figure 4: Figure 5:
Correct position of the marble Assembled inner frame with marble
2. Outer Frame Assembly
Remove the outer side rail (right) from the lower packing, the table top assembly from the
middle packing and the outer side rail (left) from the top packing (see Figure 6).
Fix them using four M8×40 screws with the hex key provided.
Remove the outer table supporting rail (upper front) from the lower packing and fix it with
four M8 x 40 screws.
Remove the outer table supporting rail (lower) from the top packing and fix it with two M8
x 40 screws. You can open the 2 side frames a little in order to put the rails inside the