5
C - Cleaning
WARNING:
• Before any operation, disconnect the appliance from the electricity supply.
• Do not clean the appliance while it is hot.
Enameled Burner Caps
The enameled burner caps must be washed with a sponge and soapy water or with a light detergent.
WARNING:
• Do not use abrasive or corrosive products.
• Do not leave substances, such as lemon or tomato juice, salt water, vinegar, coffee and milk on
the enameled surfaces for a long time.
Stainless Steel
The stainless steel areas should also be cleaned with soapy water and then dried with a soft cloth.
WARNING:
• Stainless steel can be stained if it remains in contact with highly calcareous water or aggressive
detergents for an extended period of time.
• Stainless Steel can also discolour if in contact with excessive heat.
Burners and Pan Supports
These parts can be removed to make cleaning easier. The burners must be washed with a sponge and
soapy water or with a light detergent, wiped well and placed in their housing perfectly.
After cleaning, check that the safety valve, start-up electrode and the flame-dividing ducts are not clogged
with soap or grime.
The pan supports can be washed in a dishwasher.
Gas taps
WARNING: Lubrication of the gas taps must be carried out by specialized personnel, exclusively.
In case of hardening or malfunctions in the gas taps, apply to the Customer Service.
