67
4.3.4 Configure SNMP Setup
SNMP is an application-layer protocol that provides a message format for communication between SNMP managers and
agents. By enabling SNMP function, the administrator can obtain the system information remotely.
Please click on System -> SNMP Setup and follow the below setting.
SNMP v2c Enable : Check to enable SNMP v2c.
Î ro community : Set a community string to authorize read-only access.
Î rw community : Set a community string to authorize read/write access.
SNMP v3 Enable: Check to enable SNMP v3.
SNMPv3 supports the highest level SNMP security.
Î SNMP ro user : Set a community string to authorize read-only access.
Î SNMP ro password : Set a password to authorize read-only access.
Î SNMP rw user : Set a community string to authorize read/write access.
Î SNMP rw password : Set a password to authorize read/write access.
SNMP Trap : Events such as cold start, interface up & down, and association & disassociation will report to an assigned
server.
