• Key Length: Select 64-bit or 128-bit
• Key Format: Select Hex or ASCII
• Default Tx Key: Select Key 1
• Encryption Key 1: If you selected 64-bit key length and ASCII key format,
enter 5 alphanumeric characters. If you selected 128-bit key length and
ASCII key format, enter 13 alphanumeric characters. If you selected 64-
bit key length and HEX key format, enter 10 hexadecimal characters
(0~9, A~F) for Key Setting. If you selected 128-bit key length and HEX
key format, enter 26 hexadecimal characters. This is the security key for
your wireless network.
Click OK to save the settings.
Please refer to the User’s Manual in the provided CD for other security
mode settings.
Note: It is suggested to write down the security settings (Encryption
and Key) you configured for the Router on a piece of paper and keep it
for you to add more wireless device to your network.
Step 8 Click Apply to restart the router.
After 30 seconds, you will go back to the Status page with valid IP address
assigned by you ISP (or configured by yourself if you use Static IP) in either
WAN or 3G/3.5G Status section.
