(—’3,7,
8;9’
5-+ .7Tj 5
4,5
3,7,
8,9
In the programmed edit recording function the tracks can be
programmed while checking the remaining time on each side of
the tape.
1
2
3
4
.5
Insert the tape into deck 1.
Insert the tape with the side to be recorded on first facing out
from the unit. Wind up the tape with +4,
Press CD and load the disc(s).
Press CD EDIT/CHECK twice while pressing
SHIIFT on the remote control.
“EDIT” and “PRGM” are displayed,
@When “Al” is displayed, press CD EDIT/CHECK while
pressing SHIFT again.
Press numbered buttons on the remote control
to designate the tape length.
10 to 99 minutes can be specified,
9 The + and ~ are also available to designate the tape
length,
Tape side A (front side)
Tape length
Maximum recording
time for side A
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press numbered buttons O-9 and + 10 on
the remote control to program a track.
Example: To select the 10th track of disc 2, press DISC
DIFiECT PLAY 2, then press +10 and O.
Selected track number
Remaining time on side A
Program number
Programmed tracks
6
7
8
9
Repeat step 5 for the rest of the tracks for side ‘
A.
~
i!
~i
,,
:..ay,~:
A track whose playing time is longer than the remaining time “,) ~
cannot be programmed,
!11!
,,,
E
‘...
y,, ,,:.
Press CD EDIT/CHECK while pressing SHIFT on “~
the remote control to select side B and program “’~
the tracks for side B.
After confirming “Bon the display, repeat step 5.
Tape side B (reverse side)
Press CD EDiT/CHECK while pressing SHIFT on
the remote control to select side A and press
●
to start recording.
CD play and recording of edited tracks for the first side start
simultaneously, When the end of tape is reached, deck 1 enters
the recording stop mode. After entering the recording stop
mode, go to step 9.
Press CD EDIT/CHECK while pressing SHIFT on
the remote control for recording of the second
side.
“B” is displayed.
10 Turn over the tape in deck 1 and press ● to start
recording.
Recording starts.
To stop recording
Press ■/A on deck 1, Recording and CD play stop
simultaneously.
❑
To check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK while pressing SHIFT
on the remote control to select side A or B, and press - or
- repeatedly.
Tape side
Program number
Track number Programmed
track numbers
To
change the program of each side
Press CD EDIT/CHECK while pressing SHIFT on the remote
control to select side A or B, and press
■ CLEAR to clear the
program on the selected side. Then program tracks again.
To clear the edit program
Press ■ CLEAR twice so that “EDIT disappears on the display.
● Up to 30 tracks can be programmed from any of the inserted
discs.
● “FUL12 is displayed if you attempt to program more than 30
tracks.
ENGLISH I
3
