OPERATION
P
00::
I
MODE
000
000
000
000
p
‘o *:M :
VII
II “
MODEJ
L
‘TAPE+>
44, b-
LOADING A TAPE
● You can select a reverse mode to play back one or both sides.
● Use Type I (normal) tapes only for playback.
Press the PUSH OPEN button to open the cassette
holder.
Load a tape with the exposed side facing downward.
Push the cassette holder to close.
PLAYING BACK A TAPE
Load a tape and press the TAPE + ➤ button to start
play.
Playback side of the tape
}: “The front side is being played (forward)
~: The rear side is being played (reverse)
Tape counter indicates the tape
running length,
To stop play, press the ■ button.
To pause play, press the II button. To resume play, press the
TAPE <› button.
To change the playback side in play mode, press the TAPE
<› button.
To change the playback side in
stop mode, press the ENTER
button.
To fast forward or rewind, press the <4 or > button in stop
mode. Then press the 9 button to stop the tape.
To set the tape counter to 0000
Press the ■ button in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
Selecting a reverse mode
In stop mode, press the MODE button repeatedly.
Each time the button is pressed, the reverse mode changes.
r
=-+
=)+(=)
To play one side only, select 1.
To play from front side to back side once only, select Z).
To play both sides repeatedly, select C=).
About cassette tapes
● To prevent accidental erasure, break off the plastic tabs on
the cassette tape after recording with a screwdriver or other
pointed tool.
Side A
e
Q
, <Q;;g
Tab for side A
To record on the tape again, cover the tab openings with
adhesive tape, etc.
● 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
● Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
To start play when the power is off (Direct Play
Function)
Press the TAPE +> button. The power is turned on and play
of the loaded tape begins.
ENGLISH13
