Functions
© American DJ® AUDIO Los Angeles, CA 90058 USA
Specifications subject to change without notice. XDM-241 User Instructions page 3
(1) POWER SWITCH
(2) LINE/PHONO SWITCH - Used to select the input (LINE or PHONO) to be sent to channel 1 or 2. Can also be used for
TRANSFORMER SCRATCHING.
(3) CHANNEL FADER CHANNEL 1 / CHANNEL 2 - Used to adjust the input level of each channel.
(4) CROSSFADER - Mixes the signals of channel 1 and channel 2. When the crossfader is set in the center position, both
channels can be heard at once.
(5) CUE LEVEL CONTROL - Adjusts the headphone output level.
(6) CUE SWITCH DIAL CHANNEL 1 / CHANNEL 2 - Use the cue switch dial in order to select the channel to be moni-
tored.
(7) PHONES JACK - Connect headphones to this jack. Headphones from 8 Ohms to 600 Ohms can be used. 16 Ohms is
recommended.
(8) MASTER LEVEL DISPLAY - This display shows the signal level of the master output.
(9) DJ MIC CONTROL - Adjusts the microphone volume.
(10) MIC INPUT - 1/4 inch (6.3 mm) jack plug for microphone input to mixer.
(11) MASTER LEVEL KNOB - Adjusts the level of the master output.
