6
may result in the fan not being able to start. The already lowered voltage from the
fan controller will be further reduced by the TriCool circuitry below 5V.
We recommend setting these fans to Low speed to maximize quiet computing.
The Optional Fans
There are two optional 120mm fan mounts at the front of the case inside the HDD
cages. These two fan mounts are designed to enhance the CPU or VGA card cooling.
However, you will need to remove the HDD cage (as a result of sacrificing two or
three HDD bays depending on which cage to be removed) should you choose to
use the fan mount in it. In order to build a quieter system we recommend NOT
installing the optional fans.
The Washable Air Filters
There are two filters located behind the front grills and one filter inside the lower
chamber. From time to time it will be necessary to wash the installed air filters.
Not washing the air filters will result in higher system temperatures and possible
stability problems. We recommend checking the air filters at least once a month
initially. The frequency will depend on system usage (users whose systems run
24/7 will likely have to check/wash more often than those who don’t use their
systems every day) and on environmental conditions.
To remove the front filters:
1. Push one of the fan grills at the right middle edge to open the grill .
2. There are two tabs on the filter. To remove the filter use both your hands,
grip the tabs and slide it towards the center, tag it outwards and lift out.
To remove the bottom filter:
1. Grasp the locking tab and gently push it towards the center of the filter.
2. Tug the filter away from the case and then slide it out.
For more useful suggestions and advice on building this case please visit Antec’s
FAQ’s on www.antec.com
