7.) Both of the wires that lead to the GelICell should
be disconnected. If they aren't, disconnect them
now.
Disconnect the battery wires
8.) Remove the RamKeeper from its anti-static bag.
Hold the card by its edges, like a photograph.
9.) Connect your card or cards according to the
instructions below. Refer to the illustration
below for the proper connector and placement of
your card(s).
Slot Mover RamKeeper
All GS-RAM cards Back Pocket
(including 2 Meg Expander) GS-RAM REV C or later
Apple IIGS Memory Expansion Card GS-RAM Plus REV D or later
RamPak 4GS GS-RAM 2 Meg Expander
RamStackPlus Apple IIGS Memory Expansion Card
OnBoard RamPak 4GS
OctoRam Front Connector RamStackPlus
All GS-RAM cards On Board
(except 2 Meg Expander) * Due to its large size,
OctoRam will not fit on the
back side of RamKeeper
RamKeeper Connections
Chapter One - Getting Started 7
