A SERVICE OF

logo

IPF-2000 User Manual
17
Use H.323 protocol:
If the Use Service option is checked, please fill up the IP address or the domain
name address of the gatekeeper.
If the Use Service option is not checked, please fill up the IP address or the domain
name address of the voice gateway.
Use MGCP protocol: Please fill up the IP address or domain name of the Call Agent.
Use SIP protocol: If the Use Service option is checked, please fill up the IP address or
domain name of the SIP Proxy Server in this field.
service id Set service ID according to requirement of system.
nat traversal
When using private IP to traversal the NAT, we need to set up:
z disable
When IPF-2000 is using public IP, please choose disable.
When IPF-2000 is using SIP protocol, and using the Outbound Proxy, please
choose disable
z enable
Automatically check the Public IP of the NAT router. When IPF-2000 is using the private IP,
please choose enable. After choosing enable, the nat address will automatically activate.
Without special request, please fill up 0.0.0.0 in the nat addr field and properly configure the
port on the NAT router.
z stun
Use the STUN protocol. STUN enables a device to find out its public IP address and the type
of NAT service its sitting behind. It helps the SIP traverse the NAT. If this option is selected,
please also fill up the IP address of the STUN server in the nat addr field.
nat addr
z When nat traversal is set to enable or stun, fill up the IP address pf the NAT Proxy.
Otherwise, keep this field as 0.0.0.0.
z When using the Outbound Proxy, fill up the IP address of the Outbound Proxy server.
nat ttl
This defines how many seconds a NAT traversal message will be sent to the NAT server. The
default setting is 30 seconds.
phone number With H.323/MGCP/SIP protocol used, enter the phone number of the IPF-2000.
account
z When using the H.323 protocol to logon gatekeeper, please fill up the H323 ID or
H.235account.
z When choose the prefix in the use dialplan drop-down menu, please fill up the NO
provided by ISRcard number, and “#”. For example 14589653185#.
z With MGCP protocol used, please enter the Local name of the EndpointID into this field.
z With SIP protocol used, fill up the SIP Proxy account.
pin
z When H323 protocol is used to logon the gatekeeper, fill up the password or H.235
authentication password.
z When SIP protocol is used to logon SIP Proxy Server, please fill up the password into
this field.
z When choose the prefix in the use dialplan drop-down menu, please fill up the
password provided by ISRcard number, and “#”. For example 3185#.
z With MGCP protocol used, please enter the Domain name of the EndpointID into this
field.
With MGCP protocol is used, as requested by some system, please add the bracket
with the domain name. For example, [voiptest.com].
register port According to used protocol, set as follows: