3
A. ON/OFF Switch. The current flowing from the power source to the inverter is controlled by
this switch.
B. ON/OFF and protect LED Indicator Light. GREEN will illuminate when turn the inverter ON
at normal condition. When the internal operating temperature exceeds 165 °F. this light will
turn RED and the inverter will automatically shut down. Immediately turn off the appliance if
this occurs The High Speed Cooling Fan automatically activates excessive temperatures
are detected. When this occurs turn off the inverter and determine the cause of the
overload before turning the inverter and the appliance back on.
C. 110v AC Outlets, recommend each outlet use an appliance not more than 3000W. Each
outlet with 110V, 1.5A Max.
D. High-Speed cooling fans. When the temperature inside the inverter exceeds the limits of
safe operation the Cooling Fan automatically turns on to cool the inverter. When the
temperature has lowered to a safe operating mode, the fan will shut off. The fan is not
designed to run continuously.
E. Positive Power Input Terminal.
F. Negative Power Input Terminal.
G. Remote Housing Set.
H. Display reading selection switch
J. Battery voltage and inverter output wattage digital meters.
WATT Reading: When selection switch at "watt" position. The digital number displays
"watt" reading.
VOLT Reading: If switch is on the "volt" position. The digital number will display input
"voltage" reading. These readings are the result of measuring the voltage in both the
positive and negative input terminals on the inverter. In a high voltage draw the display will
show a low voltage level due to the drop in volts that occurs between the positive and
negative input cables.
K. Ground Terminal
