System Requirements
Console
M
A VGA, SVGA, or Multisync monitor capable of the highest
resolution that you will be using on any computer in the
installation
M
A PS/2 style keyboard
M
A PS/2 style mouse
Computers
The following equipment must be installed on each computer
that is to be connected to the system:
M A VGA, SVGA or Multisync port.
M A 6-pin mini-DIN (PS/2 Style) mouse port.
M Either a 6-pin mini-DIN (PS/2 Style) keyboard port with
+5V DC on pin 4 and Ground on pin 3, or a 5-pin DIN (AT
Style) keyboard port with +5V DC on pin 5 and ground on
pin 4.
Cables
Only CS Custom cable sets specifically designed to work with
this switch may be used. One Console Connector Cable and
four KVM cable sets (2 x 1.2 m; 2 x 1.8 m) are provided with
this package.
Note: 1. Cable sets are also available in 3 m lengths. If you need
additional cables, or 3 m cables, contact your dealer.
2. If your computer uses a standard AT style keyboard
socket, you will need a PS/2-to-AT keyboard adapter
(Part No. 2A-106 or any standard keyboard adapter),
in order to plug the cable into the Computer’s
keyboard port.
3. The CS-74A only supports PS/2 style mice - it does
not support serial mice.
- 3 -
2003-02-18
