- 11 -
Installation
1. Plug your keyboard and mouse into their USB ports, located
on the front of the CS692. The ports are color coded and
labeled with an appropriate icon.
Note: The mouse connector is actually a USB 2.0 port, and
can accept any USB compatible peripheral. You can
even connect a hub to install multiple USB devices (This
may require an extra power adapter).
2. Plug your monitor into the HD audio/video port, located on the
front of the CS692. Power on the monitor.
3. Plug your speakers and microphone into the console audio
ports, located on the front of the CS692 (Optional).
Note: If your console monitor has built-in speakers and
supports audio through its HD audio/video interface,
separate speakers are not needed.
4. Plug the USB, HD audio/video, and audio connectors of the
KVM cables into their respective ports on the computers you
are installing.
5. Power on the computers.
Note: By default the switch links to the first computer that is
powered on.
1. Make sure that the power to any device that you
connect to the installation has been turned off. You
must unplug the power cords of any computers that
have the Keyboard Power On function.
2. Make sure that all devices you will be installing are
properly grounded.
cs692.fm Page 11 Wednesday, October 29, 2014 5:20 PM
