KM0832 User Manual
4
System Requirements
Consoles
The following hardware components are required for each console:
A VGA, SVGA, or MultiSync monitor capable of displaying the highest
resolution provided by any computer in the installation
Keyboard and mouse (PS/2 or USB)
Console modules are required to connect consoles to the KM0832. They
provide flexibility for your installation by allowing PS/2 and USB interfaces to
be mixed and matched at the console side. The console modules currently
available are listed in the table below. Contact your dealer for details or refer
to the documentation included with your console module.
Computers
The following hardware components are required for each computer:
A VGA, SVGA, or MultiSync video graphics card with an HDB-15 port;
or, for legacy Sun systems, a Sun 13W3 video port
PS/2 mouse and keyboard ports (6-pin Mini-DIN), or at least one USB
port; or, for legacy Sun systems, a Sun style keyboard port (8-pin Mini-
DIN)
KVM adapter cables (CPU modules) are required to connect computers to the
KM0832. Similar to console modules, they allow PS/2, USB, Sun, Mac, and
serial computers to be attached to the KM0832. The KVM adapter cables
currently available are listed in the table below. Contact your dealer for details.
Function Model Number
PS/2 Console Module KA9222
PS/2-USB Combo Graphic Console Module KA9233
USB Console Module KA9272
Function Model Number
KVM adapter
cable
(CPU module)
For PS/2 computers KA9120
For Sun legacy computers KA9130
For Sun USB computers KA9131
For serial devices KA9140
For USB computers KA9170
