KM0832 User Manual
64
(Continued from previous page.)
Repeat Steps 2 and 3 until you have assigned port access rights (or
restrictions) for all users and groups.
If you make a mistake by adding a user or group to the wrong access rights
box, simply highlight the username (or group name) again and then click
the corresponding leftward facing arrow. The selected user (or group) is
removed from the box and put back into its former position.
4. Click Save. The selected users (or groups) are given the permissions that
were assigned in the last step.
Cascaded Installations
Super administrators and administrators have full access to all KVM ports in
the installation. You must assign access rights to KVM ports for all other users
and groups. You do not need to assign access rights for users and groups to any
KVM port that cascades a KM0832. However, you must assign access rights
to KVM ports that cascade non-KM0832 KVM switches. When you assign
access rights to a KVM port that cascades a Matrix Plus KVM adapter cable,
the access rights apply to all KVM adapter cables in the chain.
Configuring Port Settings
Before you configure port settings, first verify that the KVM adapter cable for
the KVM port you wish to configure is connected to the correct KVM port on
the back panel of the KM0832. The fields in the lower section of the Port
Management Webpage are described in the table on the following page.
