128-6901
17 of 28
-17-
NOTE: It is recommended that you turn the FM
Transmitter off if you are using the low level
audio outputs in your particular application.
used to lock/unlock stream access. All future entries
into this mode displays a stream list with the current
stream in play highlighted. The Encoder knob is used to
navigate the list and highlight the stream to be adjusted.
Once a stream has been highlighted, pressing the En-
coder knob displays the text “Lock” next to the stream
and prevents the stream from being accessible during
any of the tuning modes. Locked streams can be ac-
cessed only by direct stream number entry, at which time
the user will be prompted to enter the previously stored
4-digit code. Once the correct code has been entered,
the audio begins to play. The stream returns to the locked
status if the stream is changed or the vehicle/unit is
turned off (or by returning to this menu and going through
the same process to return the stream to the list). Upon
adding a stream, the text “Lock” is removed from along-
side the stream number/name.
Lock/Unlock Default Code Function
The first time the Lock/Unlock function is accessed,
the user must enter the default lock code. The default
lock code is “0000”. This code can be maintained or
changed. To change the default lock code perform the
following procedure:
Add or Skip
Upon entering this mode, a stream list is displayed with the
current stream in play highlighted. Rotate the Encoder knob
to navigate the list and highlight the stream to be adjusted.
Once a stream has been highlighted, pressing the Select
Button displays the text “Skip” next to the stream, and pre-
vents the stream from being accessible during any of the
tuning modes. Skipped streams can only be accessed either
through direct stream number entry or by returning to this
menu and going through the same process to return the
skipped stream to the list. Upon adding a stream, the text
“Skip” is removed from alongside the stream number/ name.
Lock Options
Upon entering this mode for the first time, the user is
prompted to enter a four digit numerical code that is
Upon entering this mode, rotating the Rotary
Encoder knob to toggle between the FM ON
or FM OFF function/display selection. To select
and/or exit this function, press the Encoder knob
(No button activity for 10 seconds will also exit this
function.)
