P. 10 Installation Guide AS-1412
to re-enter all option selections for all functions of the Mode you are accessing. You may not
skip Functions*.
*NOTE: Pressing the Brakes at any given moment will save the selection(s) you have entered
and will return you to the Programming Center.
For each Function, select one of the three Options by pressing the corresponding
button on the Transmitter:
Button , for Option 1,
Button ,, for Option 2,
Buttons ,,, for Option 3.
Table 3
Programming Options
MODE 1 (* indicates default setting)
FUNCTION 1 – Ignition-controlled Door Locks
OPTION 1* Ignition-controlled Door Locks DISABLED
OPTION 2 Ignition-controlled Door Locks ENABLED
OPTION 3 Ignition-controlled Door Locks DISABLED
FUNCTION 2 – Secure Lock
OPTION 1* Secure Lock DISABLED
OPTION 2 Secure Lock ENABLE
FUNCTION 3 – Passive / Active Arming of the Starter Kill
OPTION 1* Starter Kill PASSIVE (1-minute timeout.)
OPTION 2 Starter Kill ACTIVE
OPTION 3 Starter Kill PASSIVE (3-minute timeout.)
FUNCTION 4 – Lock Pulse Duration
OPTION 1* 7/10-second LOCK / UNLOCK pulses
OPTION 2 4-second LOCK / UNLOCK pulses
OPTION 3 7/10-second LOCK pulse and two 1/4-second UNLOCK pulses
FUNCTION 5 – Flashing LED
OPTION 1* Enabled
OPTION 2 Disabled
MODE 2 (* indicates default setting)
FUNCTION 1 – Engine Run Time
OPTION 1 4-minute Run Time in Gas Mode / 9-minute in Diesel Mode.
OPTION 2* 15-minute Run Time in Gas Mode / 20-minute in Diesel Mode.
OPTION 3 25-minute Run Time in Gas Mode / 30-minute in Diesel Mode.
FUNCTION 2 – Idle Mode
OPTION 1 Idle Mode DISABLED
OPTION 2* Idle Mode ENABLED
OPTION 3 Idle Mode DISABLED
FUNCTION 3 – Engine Type – Gas or Diesel
OPTION 1 DIESEL Engine Mode (in Cold Weather Mode Run time 20 min).
OPTION 2* GASOLINE Engine Mode
OPTION 3 DIESEL Engine Mode
