724-746-5500 | blackbox.com
Page 16
ACXMODH User Manual
Chapter 3: Installation and Operation
3.2 Rackmounting
Each chassis can be rackmounted into a 19" rack or cabinet. The 2-, 4-, and 6-port chassis do not come with mounting brackets;
they need to be ordered separately. The ACXMODH21R will ship with mounting ears already assembled to the chassis. For
mounting compatibility, use the charts below; keep in mind that the mounting options have changed between the ACXMODH#R
and the ACXMODH#R-R2 models (models that end in –R2 have undergone a revision). The information will cover the modular
chassis rackmounting that are no longer being sold as a reference for existing applications.
3.2.1 Current Options
These rackmounting ears will come in pairs, one for each side of the modular chassis. In order to mount the ear onto the modular
chassis, remove the two side screws from each side, align the ear with the holes, and use the original screws to mount the ears in
place.
Figure 3-1. Installing the rackmounting ears on the chassis.
Chassis Part Number Mounting Hardware Part Number
ACXMODH2-R2 ACXMODHEAR2
ACXMODH2R-R2 ACXMODHEAR2
ACXMODH2R-P-R2 ACXMODHEAR2P
ACXMODH4-R2 ACXMODHEAR4
ACXMODH4R-R2 ACXMODHEAR4
ACXMODH6R-R2 ACXMODHEAR6
ACXMODH21R Included
3.2.2 Older Chassis Options (for existing applications)
The ACXMODH-RMK accessory is a full 19" shelf, and will allow the modular chassis below to sit on the shelf. The modular
chassis can be attached to the ACXMODH-RMK through the bottom holes:
Chassis Part Number Mounting Hardware Part Number
ACXMODH2 ACXMODH-RMK
ACXMODH2R ACXMODH-RMK
ACXMODH2R-P ACXMODH-RMK
ACXMODH4 ACXMODH-RMK
ACXMODH4R ACXMODH-RMK
ACXMODH6R ACXMODH-RMK
ACXMODH21R Included
