10/100Base-TX Hardened PoL/PoE Ethernet Extender
User’s
Manual
11
Front Panel & LEDs
LED Indicators
The LED indicators give you instant feedback on the status of the Hardened
Ethernet Extender:
LEDs State Indication
Steady Power received Power
1/2/3
Off Power off
Steady
Power Ethernet extension interface function is
enabled
PoL
Off
No power is transmitted over Ethernet
extension interface
Steady Powered device (PD) is connected
PoE
Off Powered device (PD) is disconnected
Steady A valid Extender connection established
Fast
Flashing
Data transmitted or received
Slow
Flashing
Extender port under negotiation mode
Link
Off Extender interface connection is not established
Line
Speed
Steady Displays the link speed in Mbps
Steady PoE power can be transmitted for PD PSE
Output
All off No PoE power can be transmitted for PD
Steady
A valid Ethernet connection
established
Flashing Data transmitted or received
Green
Off
Non-Ethernet connection is
established
Steady Link speed at 100Mbps
Yellow
Off Link speed at 10Mbps
Power over Link (PoL) Enabled
Distance Data Rate Receiver PoE Output
300M 100Mbps 30.0W
400M 90Mbps 15.4W
600M 60Mbps 14.0W
800M 45Mbps 9.5W
1000M 35Mbps 7.0W
1200M 20Mbps 5.0W
