724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 205
LGB5028A User‘s Manual
Chapter 7: Security
Parameter Description
Mode: Indicates the SSH mode of operation. Possible modes are:
Enabled: Enable SSH mode operation.
Disabled: Disable SSH mode operation.
Buttons:
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
7.10 HTTPs
This section shows you how to use HTTPS to securely access the switch. HTTPS is a secure communication protocol that combines
authentication and data encryption to provide secure encrypted communication via the browser.
Web interface:
To configure an HTTPS configuration in the Web interface:
1. Select “Enabled” in the mode of HTTPS configuration.
2. Select “Enabled” in the automatic redirect of HTTPS configuration.
3. Click “Save.”
Figure 7-27. The HTTPS Configuration screen.
Parameter Description
Mode: Indicates the HTTPS mode operation. Possible modes are:
Enabled: Enable HTTPS mode operation.
Disabled: Disable HTTPS mode operation.
Automatic Redirect: Indicates the HTTPS redirect mode operaration. Automatically redirect Web browser to HTTPS when HTTPS
mode is enabled. Possibel modes are:
Enabled: Enable HTTPS redirect mode operation.
Disabled: Disable HTTPS redirect mode operation.
Buttons:
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
