A SERVICE OF

logo

724-746-5500 | blackbox.com Page 13
Chapter 3: Configuration
3. Configuration
To expand a Fast Ethernet network, you can use the converter as described in the
following examples:
1. Place two converters back to back between the end devices as shown in Figure
3-1.
Device A
Device B
LHC201A
or
LHC202A
LHC201A
or
LHC202A
Twisted-
pair cable
Twisted-
pair cable
Single-mode or
multimode
fiber optic cable
10/100BASE-TX
interface
100BASE-FX
interface
Figure 3-1. Application using two media converters.
NOTE: Use two LHC201A Media Converters or two LHC202A media converters
to expand your network.