724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 11
Chapter 1: Overview
The login process now is completed. In this login menu, you must input the complete username and password respectively: the
PoE+ Gigabit Managed Switch Eco will not give you a shortcut to username automatically. This may be inconvenient, but it is
safer.
The PoE+ Gigabit Managed Switch Eco supports a simple user management function allowing only one administrator to configure
the system at the same time. If there are two or more users using an administrator’s identity, it will only allow the one who logs
in first to configure the system. The rest of the users, even with an administrator’s identity, can only monitor the system. Those
who have no administrator’s identity can only monitor the system. There is a maximum of three users able to login simultaneously
in the PoE+ Gigabit Managed Switch Eco.
NOTE: When you log in to the Switch Web Manager, you must first type the Username of the admin. The password must remain
blank at this point, so simply press Enter. When you log in the PoE+ Gigabit Managed Switch Eco Web UI management, you can
use either an ipv4 or ipv6 log in. To optimize the display, we recommend you use Microsoft® Internet Explorer® 6.0 or higher,
Netscape® V7.1 or higher, or FireFox® V1.00 above and set the resolution 1024x768. The switch supports a neutral Web browser
interface.
NOTE: the PoE+ Gigabit Managed Switch Eco enables the DHCP function, so if you do not have DHCP server to provide IP
addresses to the switch, the switch default IP is 192.168.1.1.
NOTE: If you need to configure the function or parameter, refer to those sections in the User Guide. Or, access the switch and
click the “help“ under the Web GUI, and the switch will open its easy-to-use help content to teach you how to set the parame-
ters, as shown in Figure 1-2.
Figure 1-2. Accessing the on-line help function.
LPB2810A
