welcome contents
installation
operation
rter
inormation
6
To speaker
output port
To USB port
To primary video
output port
Connections at the local module
1 Where possible ensure that power is disconnected from the computer
system to be connected.
4 Optionally connect a local video
monitor to the video out feed-
through connector on the local
module.
3
Optionally connect local speakers
to the audio output connector
on the local module.
To local
speakers
SRX
TO REMO
TE
LINK
POWER
ON
®
6 5500
OUT
To local
monitor
2 Attach the video, USB (see the
Important note on page 5) and
(optionally) audio connections
from the computer system to
the relevant sockets on the
local module.
[Dual VGA variant only]
Optionally attach a second
video input from the computer
system to the upper video in
socket on the local module.
Note: The dual VGA
variant has its primary
video, USB and audio
connectors arranged
in a similar manner to
the single unit (shown
above).
To secondary video
output port
SRX
TO REMOTE
LINK
POWER
ON
OUT
AB
To secondary
local monitor
[Dual VGA variant only]
Optionally attach a second
video monitor to the upper
video out socket on the
local module.
Note: Do not use a USB cable that is longer than 3 metres to connect the local
module to the computer system.
