A SERVICE OF

logo

Chapter 3: Installation
724-746-5500 | blackbox.com
Page 13
4
5V
2.5A
INDOOR USE ONLY
OPTIONS
USER
CONSOLE
USER
CONSOLE
3.2.3 Power connection
The Wizard DP USB unit is supplied with a 12.5W power adapter. There is no on/off switch on the unit, so operation begins as
soon as a power adapter is connected.
3.2.3.1 Connecting the power adapter
1 Attach the output lead from the power adapter to the 5V socket on the rear panel of the unit.
Figure 3-8. Connecting the power adapter to the Wizard DP USB
Note: Both the unit and its power supply generate heat when in operation and will become warm to the touch. Do not enclose
them or place them in locations where air cannot circulate to cool the equipment. Do not operate the equipment in ambient
temperatures exceeding 40 degrees Centigrade. Do not place the products in contact with equipment whose surface tempera-
ture exceeds 40 degrees Centigrade.
2 Connect the IEC connector of the supplied country-specific power cord to the socket of the power adapter.
Figure 3-9. Connecting the IEC cord to the power adapter
3 Connect the power lead to a nearby main supply socket.