A SERVICE OF

logo

Open as PDF
next previous
D9112B | Program Entry Guide | 10.0 Skeds EN | 87
Bosch Security Systems | 2/04 | 74-06145-000-D
S## Function Code
Enter the function code you want this Sked to execute.
The programmer automatically displays the parameter prompt after you enter the function code if the Sked
function requires additional parameters.
After you program the parameters associated with the Sked function, press [EXIT GROUP] to continue
programming the Sked.
Default: Blank
Selection: 1 to 15 (except 12)
Default Description Sub-prompt Selection
1
S## Area 1
Yes
No
Arm Area 1.
Do not arm Area 1.
Arm Area. Entries in the Arm
Area prompts define the area(s) this
Sked arms. The Sked can arm
multiple areas. If any point is
faulted when the Sked executes, it is
force armed.
S## Area 2
Yes
No
Arm Area 2.
Do not arm Area 2.
S## Area 3
Yes
No
Arm Area 3.
Do not arm Area 3.
S## Area 4
Yes
No
Arm Area 4.
Do not arm Area 4.
S## Area 5
Yes
No
Arm Area 5.
Do not arm Area 5.
S## Area 6
Yes
No
Arm Area 6.
Do not arm Area 6.
S## Area 7
Yes
No
Arm Area 7.
Do not arm Area 7.
S## Area 8
Yes
No
Arm Area 8.
Do not arm Area 8.