Bosch Security Systems | Version 1.1
DVR4C Remote Viewer | Operation Manual | Archive Player EN | 13
6Archive Player
When you archive stored data from the DVR, the Archive
Player software program is copied together with the data.
This program allows you to playback the copied images
without having to install the remote software.
The Archive Player does not need to be installed on the PC.
Just run the program and retrieve the copied data for
playback. To enhance the image quality, you can use
DirectX. To enable or disable DirectX, right click the image
and select DirectX.
To run the Archive Player, double-click the icon from the
location where the data was stored. Click the
Open file
button of the Archive Player, select a file for playback
and click OK. The start and end time of the file are shown on
the status bar at the bottom of the window.
If the archived file is in .dv4 format, there can be upto four
video streams in the file. The first channel is displayed by
default. To select a different channel, right click the image
and move the cursor onto
Channel. You can now choose one
of the available channels from the list.
Click the audio icon to turn the sound on and off.
Adjust the volume as required.
The remaining function buttons are
Play, Reverse Play,
Pause, Backward Step, Forward Step, Save, Print,
Athentication check.
• Play: Replay the copied file.
• Reverse Play: Play Reverse
•
Pause: Pause the playback
• Backward Step: Backwards replay of images frame
by frame
• Forward Step: Replay frame by frame
• Save: Store the currently displayed image as a still
image. Before the capture, you can add a comment to the
image.
•
Print: Print the currently displayed image as a still
image. Before printing, you can add a comment to the
image.
•
Authentication check: Click to authenticate the
recorded video. If corrupt images are found, they are
shown in the result box.
