Global View Station 1000 Test Software | en 31
Bosch Security Systems, Inc. Operations Manual F.01U.173.867 | 2.0 | 2010.11
6.3 Auxiliary Controls
6.3.1 Aux 1 2x Doubler Function
– LED1 – doubler function indicator
– LED1 ON = doubler on
– LED1 OFF = doubler off
– Default: OFF
6.3.2 Aux 2 Wiper Function
– LED2 – wiper function indicator
–LED2 ON = wiper on
– LED2 OFF = wiper off
– Default: OFF
6.3.3 Aux 3 Illuminator Control
– LED3 – illuminator control indicator
– LED3 ON = automatic photocell control on
– LED3 OFF = manual control on (photocell off)
– Default: MANUAL control mode (LED off)
6.3.4 Aux 4 Iris Control
– No Aux4 indicator present on this board, only on Camera Control board
6.3.5 Aux 5 Lens IR Correction Mode
– LED5 – IR correction mode indicator
– LED5 ON = lens IR-correction enabled
– LED5 OFF = lens IR-correction disabled
– Default: IR-correction disabled
6.3.6 Aux 6 Camera Color/Mono Mode
– LED6 – camera mode indicator
– LED6 ON = monochrome mode on
– LED6 OFF = color mode on
– Default: color mode
6.3.7 Aux 7 ZX700 IR On/Off Control
– LED7 – ZX700 on/off indicator
– LED7 ON = ZX700 on
– LED7 OFF = ZX700 off
– Default: ZX700 off
– CN3 – relay connection to Meanwell PSU for control
6.3.8 Aux 8 SLED IR On/Off Control
– LED8 – SLED on/off indicator
– LED8 ON = SLED on
– LED8 OFF = SLED off
– Default: SLED off
– LED11 – indicates power input to SLED control boards
– Default: LED11 on (showing power available for SLED)
– CN4 – relay connection to two SLED control boards
– T3 – power input to current control board
