PB
Refer to and follow Notes and Warning listed under Wall Installation, Single Oven (facing page)
UNDERCOUNTER INSTALLATION, SINGLE OVEN
NOTE: Decorative inserts
must maintain minimum
spacing as shown.
NOTE: Decorative inserts
must maintain minimum
spacing as shown.
Secure oven to cabinet using the screws
provided. Screws should be inserted
through the mounting holes in the positions
indicated in the frame (open door to see
frame and mounting holes). Do not over-
tighten screws.
1/4" minimum spacing if decorative
filler panels are used.
1/4" min. distance between oven
door frame and adjacent doors or
drawer fronts.
Bottom support surface must be solid, level
and able to support at least 150 lbs.
Oven electrical supply: Locate junction box
in adjacent cabinet or below bottom
support surface.
HBN Models: 25-3/8" opening width
36" countertop height
23" opening height
Toe space area
HBL Models: 29-1/4" width of oven door frame
HBN Models: 26-5/8" width of oven door frame
7-1/2"
min.
HBL Models: 28" opening width
