FlexiDome2X Configuration | en 45
Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03
5.6.5 Privacy masking submenu
Selecting an area for privacy masking
To set-up an area for privacy masking, access the area menu by
selecting the Area option from the privacy masking menu. Upon
entering the Area menu, the current area is displayed with the
upper left corner flashing. The flashing corner of the image can
be moved with the Up, Down, Left, Right arrow keys. Pressing
the Select key moves the flashing cursor to the opposite corner,
which can now be moved. Pressing Select again freezes the
area and exits the area menu.
There are four programmable privacy mask areas.
5.6.6 Defaults submenu
Item Selection Description
Pattern
Black, Grey,
White, Noise
Selects pattern for all masks.
Mask
1, 2, 3, 4
Four different areas can be masked.
Active On, Off
Turns each of the four masks on or off.
Window
Submenu Select to open a window in which to define
the mask area.
Item Selection Description
Restore All
No, Yes Restores all settings of the six modes to their
default (factory) values. Select YES then
press the Menu/Select button to restore all
values.
When completed the message RESTORED! is
shown.
