A SERVICE OF

logo

Open as PDF
next previous
16 en | VG5 Audio Connections AutoDome 700 Series IP PTZ Camera
F.01U.215.777 | 1.0 | 2011.07 User Manual Bosch Security Systems, Inc.
3.1.3 Activating Audio Reception
To configure audio via the Web browser, do the following:
1. Open the AutoDome 700 Series Livepage, then click the Settings tab.
2. Click the Camera Settings link from the left pane, then click Miscellaneous. The
AutoDome 700 Series displays the Audio settings.
3. Click the Audio radio button to activate audio over IP.
Figure 3.1 Configuring Audio Settings
NOTICE!
The audio signal is sent in a separate data stream parallel to the video data, and so increases
the network load. The audio data is encoded according to G.711 or L16 and requires an
additional bandwidth of approximately 80 Kbit/s for each connection.