VideoJet X10 SN Configuration Using a Web Browser | en 53
Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06
IP Address
Enter the IP address for the remote video device.
1. If you do not know the IP address, click the Network Scan button. The search for
possible devices in the network is started. A small arrow is then displayed next to the IP
Address field.
2. Click the arrow to display the list of devices detected.
3. Click the required device in the list to transfer its IP address.
5.23 Advanced Mode: Recording Profiles
You can define up to ten different recording profiles. You will then use these recording
profiles in the recording scheduler, where they are linked with the individual days and times
(see Section 5.25 Advanced Mode: Recording Scheduler, page 56).
1. Click one of the tabs to edit the corresponding profile.
NOTICE!
You can change or add to the recording profile description on the tabs on the Recording
Scheduler page (see Section Time periods, page 57).
