A SERVICE OF

logo

Open as PDF
next previous
15
ThePowerPortal.COM
All power levels stated gross power per SAE J1940
Features:
• Dura-Bore™castironcylindersleevefor
extended life
• Maintenance-freeMagnetron®electronic
ignition for quick, dependable starts
• Dual-Clean™aircleanerpleatedpaper
lterwithafoampre-cleanerensures
maximum protection for extended
engine life
• Overheadvalvedesign(OHV)forcooler
operation and longer valve life
• Buyerprotectionpackageprovidestwo-
year limited consumer engine warranty
14.50 Gross Torque
305 CC
Bore 3.12 in. (79.2 mm)
Stroke 2.44 in. (61.9 mm)
Oil Capacity 26-28 fl. oz. (0.77 - 0.83 L)
Model
Type
Shipping Weight
Crankshaft
Crankshaft (P.T.O.)
Extension
Dimension
Starter Position
Bolt-On/Changeable
Governor
Controls
Flange Mtg.
Manual Choke
Remote Stop Switch
Oil Gard
Fuel Tank (Quarts)
Top Governor Speed
Notes
20S232
0035 52 794719 Threaded 1-14, 1” tapped length 3-21/32(c) 10:30 M AG/R/MF X X X 4 3600 •
0038 63 794718 Tapered, tapped 5/16-24 4-11/32(c) 10:30 M AG/R/MF X X X 4 3750 •
20S237
0041 71 794716 1” dia., Keyway, tapped 3/8-24 2-29/32(c) 10:30 M AG/R/MF X X X 4 3600 •
u
0042 62 794717 1” dia., Keyway, tapped 7/16-20 3-21/32(c) 10:30 M AG/R/MF X X X X 4 3600
•
u
2
1533 69 794720 3/4” dia., 3/16 Keyway, tapped 3/8-24 2-21/32(c) 10:30 M AG/R/MF X X X 4 3600
•
1
20S252
0049 65 794721 6 to 1 gear reduction ccw rotation gear shaft, 1” dia Keyway 3-1/8(a) 10:30 M AG/R/MF X X 4 3600
20S257
0050 84 794721 6 to 1 gear reduction ccw rotation gear shaft, 1” dia Keyway 3-1/8(a) 10:30 M AG/R/MF X X 4 3600
u
u Engine equipped with 12 Volt Gear Drive Starter and 10 Amp DC Alternator with Starter Panel Assembly.
1
Engine equipped with 12 Volt Gear Drive Starter and 3 Amp DC Alternator.
2
DP bearing Magneto Side
•
Ball bearing PTO
3.9690
[100.813]
.5940
[15.088]
1.0940
[27.788]
3.5630
[90.5]
7.6880
[195.275]
.9995
.0005
[25.39]
2.5620
[65.075]
3.5360
[89.814]
4.5960
[116.738]
15.91
[404.2]
14.51
[368.6]
To make the center line of crankshaft the same as 190000 and 250000 Model Series, order 695154 spacer kit.
4X .312-24 UNF-28
.750 19.05 MIN. DEPTH FULL THD.
ON ø5.000 127.00 B.C.
2.40
[60.9]
.35
[8.8]
BORE CL
14.22
[361.1]