Chapter 8 Receiving Faxes 8-7
Receiving Faxes
■ If you hear a voice:
4 Start your conversation. If the caller
wants to send a fax after talking to
you, ask them to press the start button
on their fax machine.
5 When you hear a long beep, press
Start/Copy on your unit and hang up
to begin receiving the document.
• If you are using the telephone and it is
located away from your unit, dial 25 (the
default remote receiving ID) on your
telephone and hang up.
n
• If using the handset, be sure to hang up after you press Start/Copy on the unit,
otherwise the call will be disconnected.
• Your unit will alert you by beeping if the handset is not hung up properly. Make sure the
handset is seated properly in its cradle. If you do not want the unit to beep, disable the
OFFHOOK ALARM setting (1 p. 14-4).
• If you cannot activate reception from the telephone, check that the REMOTE RX setting
is enabled (1 p. 14-7).
• You can change the remote receiving ID (1 REMOTE RX ID, p. 14-7), or disable remote
receiving (1 REMOTE RX, p. 14-7).
• If you have an answering machine connected to your unit that can carry out remote-
control operations (controlling your answering machine from a remote telephone), the
security code for this function may be the same as the remote receiving ID of your unit. If
this is the case, make sure you change the unit’s remote receiving ID to make it distinct
from the answering machine’s security code (1 REMOTE RX ID, p. 14-7).
