Sequential broadcasting
Sending a document to more than one location
Sequential broadcasting sends one document to more than one location.
You can send to a total of 31 destinations as follows:
One-touch Speed Dialling = 10 destinations
Coded Speed Dialling = 20 destinations
Regular dialling (Numeric buttons dialling) = 1 destination
You can enter the One-touch Speed Dialling and Coded Speed Dialling destinations in any order. You
simply press the One-touch Speed Dialling button, or press [CODED DIAL] followed by the two-digit
code (with the numeric buttons).
You can also include one destination using Regular dialling. Remember that when using regular
dialling, you must press [START/COPY] after entering the number.
You can send up to 21 A4-size pages (based on the Canon FAX Standard Chart No.1-standard
resolution).
1
Feed the document face-down into the
Automatic Document Feeder (ADF).
See Loading the document, p. 49.You can set the
resolution and density. See p. 51.
2
Dial the other party’s fax number.
¶ You can send to up to 31 destinations.
¶ Simply enter the numbers one after the other:
press the desired One-touch Speed Dialling
button or press [CODED DIAL] followed by
the two-digit code (with the numeric buttons).
¶ You can enter only one number directly with
the numeric buttons using regular dialling.
Remember to press [START/COPY] after
entering the number.
¶ You can also press [REDIAL/PAUSE] to redial
the last number dialled with the numeric
buttons.
¶ You must press each button within 10 seconds
of the preceding one. The fax begins the
operation approximately 10 seconds after you
press the last button.
3
Press [START/COPY].
¶ The fax reads the document into memory and
begins sending. Between transmissions, MULTI
TRANS ON displays on the LCD.
¶ To cancel a transmission, press [STOP] during
dialling or transmission. All transmissions in the
sequence are cancelled.
STANDARD
TEL= 3456 7890
START/COPY
TX/RX NO. XXXX
MEMORY INPUT P01
1 sec.
66
