using only one telephone line. Your machine will automatically monitor the ring pattern, and will
automatically receive the fax if the ring pattern is a fax call.
To use DRPD, follow the procedure below to set the fax ring pattern that matches the pattern assigned by
your telephone company.
Note
• Contact your local telephone company for detailed information on this service.
1.
Make sure that the machine is turned on.
2.
Select FAX on the HOME screen.
LCD and Operation Panel
3.
Use the button to select Function list, then press the OK button.
The Function list screen is displayed.
4.
Use the button to select Receive mode settings, then press the OK button.
5.
Use the button to select DRPD.
6.
Press the right Function button.
7.
Use the button to select DRPD: FAX ring pattern, then press the OK button.
The DRPD: FAX ring pattern screen is displayed.
8.
Select the ring pattern that your telephone company assigned to your fax number, then
press the OK button.
9. Press the Back button.
The Receive mode settings screen is displayed.
10. Press the OK button.
The Function list screen is displayed.
576
