10
Connect the Power Cord and Turn On the Machine
1 Connect the power cord into the rear socket on the back side of the machine and the wall outlet, and press
the [I] side of the main power switch (A) to ON.
2 The machine enters the standby mode.
1 0 0 % L T R
T E X T / P H O T O 1
Ex.
The LCD display turned o:
The machine may enter the sleep mode while you are setting up the machine. Press [Energy Saver] to turn the machine back on and
continue the setup.
<CLOSE COVER/TONER COVER> is displayed:
Make sure that the toner cover and scanning platform are closed properly. (See “Install Toner Cartridge,” on p. 5.)
<SET PAPER AGAIN/SET TONER AGAIN> is displayed:
Check the installation of the toner cartridge and the placement of the paper. (See “Install Toner Cartridge,” on p. 5 and “Set Up the
Paper Cassette and Load Paper,” on p.
8.)
Any data stored in the memory, including received fax documents, will be deleted if you turn o the main power switch of the machine.
●
●
●
Set Up the Machine
